*Part of lab lesson 8*

There are two parts to lab lesson 8. The entire lab will be worth 100 points.

*Lab lesson 8 part 2 is worth 50 points*

For part 2 you will have 40 points if you enter the program and successfully run the program tests. An additional 10 points will be based on the style and formatting of your C++ code.

*Style points*

The 10 points for coding style will be based on the following guidelines:

- Comments at the start of your programming with a brief description of the purpose of the program.
- Comments throughout your program
- Proper formatting of your code (follow the guidelines in the
*Gaddis*text book, or those used by your*CS 1336*professor) - If you have any variables they must have meaningful names.

*Development in your IDE*

For lab lesson 8 (both parts) you will be developing your solutions using an Integrated Development Environment (IDE) such as Visual Studio, Code::Blocks or Eclipse. You should use whatever IDE you are using for your *CS 1336 class*. Once you have created and tested your solutions you will be uploading the files to zyBooks/zyLabs. Your uploaded file *must* match the name specified in the directions for the lab lesson. You will be using an IDE and uploading the appropriate files for this and all future lab lessons.

For this and all future labs the name of the source files must be:

`lessonXpartY.cpp`

Where X is the lab lesson number (8 for lab lesson 8) and Y is the part number (1 for part 1, 2 for part 2).

You will need to develop and test the program in your IDE. Once you are satisfied that it is correct you will need to upload the source file to *zyBooks/zyLabs*, and submit it for the *Submit mode* tests. If your program does not pass all of the tests you need to go back to the IDE, and update your program to fix the problems you have with the tests. You must then upload the program from the IDE to *zyBooks/zylabs* again. You can then run the tests again in *Submit mode*.

When running your program in *Submit mode* it is very important that you look at the output from *all* of the tests. You should then try and fix all of the problems in your IDE and then upload the updated code to *zyBooks/zyLabs*.

*C++ requirements*

*You are not allowed to use any global variables. Use of global variables will result in a grade of zero for part 1.*

Your program must have function `main`

, function `presentValue`

, three read functions, and a display function. Including `main`

this is **six** functions.

The `presentValue`

function must have the following signature:

`double presentValue(double futureValue, double interestRate, int numberYears)`

The `presentValue`

needs to calculate the present value and return that back to the calling function. The formula for this is above. Note that the annual interest would be .08 for 8%.

Failure to follow the C++ requirements could reduce the points received from passing the tests.

*General overview*

In part 2 you will be creating multiple functions to calculate the present value.

You may be asking what a “present value” is. Suppose you want to deposit a certain amount of money into a savings account and then leave it alone to draw interest for some amount of time, say 12 years. At the end of the 12 years you want to have $15,000 in the account. The present value is the amount of money you would have to deposit today to have $15,000 in 12 years.

The formula used needs the future value (F) and annual interest rate (r) and the number of years (n) the money will sit in the account, unchanged. You will be calculating the present value (P).

P = F / ( (1 + r) ^ n)

In the above expression the value (1 + r) needs to be raised to the nth power. Assume that ^ is the power function and x^2 is x to the 2nd power (x squared)

**You are not allowed to use any global variables. Use of global variables will result in a grade of zero for part 2.**

*Three read functions*

You must have functions to read in the future value, the annual interest rate, and the number of years. That would be three different functions. Give these functions meaningful names. Note that the order of the values will be future value, annual interest rate, and number of years.

In all cases you need to return any valid value back to the calling function.

For all three functions you will write out to `cout`

as prompt for an input value. You will read in that value from `cin`

. If the value is invalid (zero or negative) you need to display an error message and reread the value (with another prompt). You need to do this in a loop and continue looping until a valid value has been entered. Only the number of years can be an `int`

value. The rest should be of type `double`

.

Here are the prompts for the three values you need to read in:

`Enter future value`

Enter annual interest rate

Enter number of years

Note that the interest rate will be a number such as 10 or 12.5. These are to be read in as percentages (10% and 12.5%). You will need to divide these values by 100 to convert them into the values needed in the function (.1 and .125 for the above values). This conversion needs to be done before you call the `presentValue`

function (see below). If you do the conversion in the `presentValue`

function your program will fail the unit tests, so do the conversion *before* you call the calculate function.

Here are the error messages you need to display if the values are negative:

`The future value must be greater than zero`

The annual interest rate must be greater than zero

The number of years must be greater than zero

You will also need a function called `presentValue`

with the following signature:

`double presentValue(double futureValue, double interestRate, int numberYears)`

The `presentValue`

needs to calculate the present value and return that back to the calling function. The formula for this is above. Note that the annual interest would be .08 for 8%.

Note that the interest rate will be a number such as 10 or 12.5. These are to be read in as percentages (10% and 12.5%). You will need to divide these values by 100 to convert them into the values needed in the function (.1 and .125 for the above values). This conversion needs to be done before you call the `presentValue`

function (see below). If you do the conversion in the `presentValue`

function your program will fail the unit tests, so do the conversion *before* you call the calculate function.

*The display function*

You also need a function that displays the present value, future value, interest rate, and number of years. The function needs to display the interest rate as %, so .05 would display as 5.000%. Give your display function a meaningful name. You will be passing a number of values to this function.

Here is the sample output for a present value of $69,046.56, a future value of $100,000, an interest rate of 2.5% and a number of years of 15,

`Present value: $69046.56`

Future value: $100000.00

Annual interest rate: 2.500%

Years: 15

Note that the present value and future value have three digits of precision to the right of the decimal point but the interest rate only has one digit to the right of the decimal point.

The `main`

function will be the driver for your program.

Your program will only be processing one set of valid values for future value, annual interest rate and number of years.

Get the values for these by calling the read functions you created above.

Once you have the values you need to call your `presentValue`

. Using the result from the `presentValue`

and the input values you read in with your read functions you need to call your display function (written above) to display the values.

*The* *main**function*

The `main`

function will be the driver for your program. All of the non-`main`

functions are called from `main`

.

For the following sample run assume the input is as follows:

`1000000.0`

5.0

25

Your program should output the following:

`Enter future value`

Enter annual interest rate

Enter number of years

Present value: $295302.77

Future value: $1000000.00

Annual interest rate: 5.000%

Years: 25

Here is an example with some invalid data

Input values:

`-100`

0

1000000.0

5.0

25

Output:

`Enter future value`

The future value must be greater than zero

Enter future value

The future value must be greater than zero

Enter future value

Enter annual interest rate

Enter number of years

Present value: $295302.77

Future value: $1000000.00

Annual interest rate: 5.000%

Years: 25

**Failure to follow the requirements for lab lessons can result in deductions to your points, even if you pass the validation tests. Logic errors, where you are not actually implementing the correct behavior, can result in reductions even if the test cases happen to return valid answers. This will be true for this and all future lab lessons.**

*Expected output*

There are eight tests. The first test will run your program with input and check your output to make sure it matches what is expected. The next three tests are unit tests. The unit tests will directly call the `presentValue`

function. The compilation of the unit test could fail if your `presentValue`

function does not have the required signature. The final four tests will run your program with various input values and make sure you are calculating the correct answers.

You will get yellow highlighted text when you run the tests if your output is not what is expected. This can be because you are not getting the correct result. It could also be because your formatting does not match what is required. The checking that zyBooks does is very exacting and you must match it exactly. More information about what the yellow highlighting means can be found in course “How to use zyBooks” – especially section “1.4 zyLab basics”.

Finally, **do not** include a `system("pause");`

statement in your program. This will cause your verification steps to fail.

*Note:* that the `system("pause");`

command runs the `pause`

command on the computer where the program is running. The `pause`

command is a **Windows** command. Your program will be run on a server in the cloud. The cloud server may be running a different operating system (such as **Linux**).

*Error message “Could not find main function”*

Now that we are using functions some of the tests are unit tests. In the unit tests the zyBooks environment will call one or more of your functions directly.

To do this it has to find your main function.

Right now zyBooks has a problem with this when your int main() statement has a comment on it.

For example:

If your main looks as follows:

`int main() // main function`

You will get an error message:

`Could not find main function`

You need to change your code to:

`// main function`

int main()

If you do not make this change you will continue to fail the unit tests.